Chilkat Online Tools

BatchDescribeMergeConflicts Ruby Example

AWS CodeCommit

require 'chilkat'

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

rest = Chilkat::CkRest.new()

authAws = Chilkat::CkAuthAws.new()
authAws.put_AccessKey("AWS_ACCESS_KEY")
authAws.put_SecretKey("AWS_SECRET_KEY")

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
authAws.put_Region("us-west-2")
authAws.put_ServiceName("codecommit")
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
rest.SetAuthAws(authAws)

# URL: https://codecommit.us-west-2.amazonaws.com/
# Use the same region as specified above.
success = rest.Connect("codecommit.us-west-2.amazonaws.com",443,true,true)
if (success != true)
    print "ConnectFailReason: " + rest.get_ConnectFailReason().to_s() + "\n";
    print rest.lastErrorText() + "\n";
    exit
end

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

json = Chilkat::CkJsonObject.new()
json.UpdateString("conflictDetailLevel","string")
json.UpdateString("conflictResolutionStrategy","string")
json.UpdateString("destinationCommitSpecifier","string")
json.UpdateString("filePaths[0]","string")
json.UpdateInt("maxConflictFiles",123)
json.UpdateInt("maxMergeHunks",123)
json.UpdateString("mergeOption","string")
json.UpdateString("nextToken","string")
json.UpdateString("repositoryName","string")
json.UpdateString("sourceCommitSpecifier","string")

# The JSON request body created by the above code:

# {
#   "conflictDetailLevel": "string",
#   "conflictResolutionStrategy": "string",
#   "destinationCommitSpecifier": "string",
#   "filePaths": [
#     "string"
#   ],
#   "maxConflictFiles": number,
#   "maxMergeHunks": number,
#   "mergeOption": "string",
#   "nextToken": "string",
#   "repositoryName": "string",
#   "sourceCommitSpecifier": "string"
# }

rest.AddHeader("Content-Type","application/x-amz-json-1.1")
rest.AddHeader("X-Amz-Target","CodeCommit_20150413.BatchDescribeMergeConflicts")

sbRequestBody = Chilkat::CkStringBuilder.new()
json.EmitSb(sbRequestBody)
sbResponseBody = Chilkat::CkStringBuilder.new()
success = rest.FullRequestSb("POST","/",sbRequestBody,sbResponseBody)
if (success != true)
    print rest.lastErrorText() + "\n";
    exit
end

respStatusCode = rest.get_ResponseStatusCode()
print "response status code = " + respStatusCode.to_s() + "\n";
if (respStatusCode != 200)
    print "Response Header:" + "\n";
    print rest.responseHeader() + "\n";
    print "Response Body:" + "\n";
    print sbResponseBody.getAsString() + "\n";
    exit
end

jResp = Chilkat::CkJsonObject.new()
jResp.LoadSb(sbResponseBody)

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

baseCommitId = jResp.stringOf("baseCommitId")
destinationCommitId = jResp.stringOf("destinationCommitId")
nextToken = jResp.stringOf("nextToken")
sourceCommitId = jResp.stringOf("sourceCommitId")
i = 0
count_i = jResp.SizeOfArray("conflicts")
while i < count_i
    jResp.put_I(i)
    ContentConflict = jResp.IntOf("conflicts[i].conflictMetadata.contentConflict")
    FileModeConflict = jResp.IntOf("conflicts[i].conflictMetadata.fileModeConflict")
    Base = jResp.stringOf("conflicts[i].conflictMetadata.fileModes.base")
    Destination = jResp.stringOf("conflicts[i].conflictMetadata.fileModes.destination")
    Source = jResp.stringOf("conflicts[i].conflictMetadata.fileModes.source")
    FilePath = jResp.stringOf("conflicts[i].conflictMetadata.filePath")
    FileSizesBase = jResp.IntOf("conflicts[i].conflictMetadata.fileSizes.base")
    FileSizesDestination = jResp.IntOf("conflicts[i].conflictMetadata.fileSizes.destination")
    FileSizesSource = jResp.IntOf("conflicts[i].conflictMetadata.fileSizes.source")
    IsBinaryFileBase = jResp.IntOf("conflicts[i].conflictMetadata.isBinaryFile.base")
    IsBinaryFileDestination = jResp.IntOf("conflicts[i].conflictMetadata.isBinaryFile.destination")
    IsBinaryFileSource = jResp.IntOf("conflicts[i].conflictMetadata.isBinaryFile.source")
    MergeOperationsDestination = jResp.stringOf("conflicts[i].conflictMetadata.mergeOperations.destination")
    MergeOperationsSource = jResp.stringOf("conflicts[i].conflictMetadata.mergeOperations.source")
    NumberOfConflicts = jResp.IntOf("conflicts[i].conflictMetadata.numberOfConflicts")
    ObjectTypeConflict = jResp.IntOf("conflicts[i].conflictMetadata.objectTypeConflict")
    ObjectTypesBase = jResp.stringOf("conflicts[i].conflictMetadata.objectTypes.base")
    ObjectTypesDestination = jResp.stringOf("conflicts[i].conflictMetadata.objectTypes.destination")
    ObjectTypesSource = jResp.stringOf("conflicts[i].conflictMetadata.objectTypes.source")
    j = 0
    count_j = jResp.SizeOfArray("conflicts[i].mergeHunks")
    while j < count_j
        jResp.put_J(j)
        EndLine = jResp.IntOf("conflicts[i].mergeHunks[j].base.endLine")
        HunkContent = jResp.stringOf("conflicts[i].mergeHunks[j].base.hunkContent")
        StartLine = jResp.IntOf("conflicts[i].mergeHunks[j].base.startLine")
        destinationEndLine = jResp.IntOf("conflicts[i].mergeHunks[j].destination.endLine")
        destinationHunkContent = jResp.stringOf("conflicts[i].mergeHunks[j].destination.hunkContent")
        destinationStartLine = jResp.IntOf("conflicts[i].mergeHunks[j].destination.startLine")
        isConflict = jResp.IntOf("conflicts[i].mergeHunks[j].isConflict")
        sourceEndLine = jResp.IntOf("conflicts[i].mergeHunks[j].source.endLine")
        sourceHunkContent = jResp.stringOf("conflicts[i].mergeHunks[j].source.hunkContent")
        sourceStartLine = jResp.IntOf("conflicts[i].mergeHunks[j].source.startLine")
        j = j + 1
    end
    i = i + 1
end
i = 0
count_i = jResp.SizeOfArray("errors")
while i < count_i
    jResp.put_I(i)
    exceptionName = jResp.stringOf("errors[i].exceptionName")
    filePath = jResp.stringOf("errors[i].filePath")
    message = jResp.stringOf("errors[i].message")
    i = i + 1
end

# A sample JSON response body parsed by the above code:

# {
#   "baseCommitId": "string",
#   "conflicts": [
#     {
#       "conflictMetadata": {
#         "contentConflict": boolean,
#         "fileModeConflict": boolean,
#         "fileModes": {
#           "base": "string",
#           "destination": "string",
#           "source": "string"
#         },
#         "filePath": "string",
#         "fileSizes": {
#           "base": number,
#           "destination": number,
#           "source": number
#         },
#         "isBinaryFile": {
#           "base": boolean,
#           "destination": boolean,
#           "source": boolean
#         },
#         "mergeOperations": {
#           "destination": "string",
#           "source": "string"
#         },
#         "numberOfConflicts": number,
#         "objectTypeConflict": boolean,
#         "objectTypes": {
#           "base": "string",
#           "destination": "string",
#           "source": "string"
#         }
#       },
#       "mergeHunks": [
#         {
#           "base": {
#             "endLine": number,
#             "hunkContent": "string",
#             "startLine": number
#           },
#           "destination": {
#             "endLine": number,
#             "hunkContent": "string",
#             "startLine": number
#           },
#           "isConflict": boolean,
#           "source": {
#             "endLine": number,
#             "hunkContent": "string",
#             "startLine": number
#           }
#         }
#       ]
#     }
#   ],
#   "destinationCommitId": "string",
#   "errors": [
#     {
#       "exceptionName": "string",
#       "filePath": "string",
#       "message": "string"
#     }
#   ],
#   "nextToken": "string",
#   "sourceCommitId": "string"
# }