Chilkat Online Tools

CreateBGPPeer phpExt Example

AWS Direct Connect

<?php

// The version number (9_5_0) should match version of the Chilkat extension used, omitting the micro-version number.
// For example, if using Chilkat v9.5.0.48, then include as shown here:
include("chilkat_9_5_0.php");

// This example requires the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

$rest = new CkRest();

$authAws = new CkAuthAws();
$authAws->put_AccessKey('AWS_ACCESS_KEY');
$authAws->put_SecretKey('AWS_SECRET_KEY');

// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region('us-west-2');
$authAws->put_ServiceName('directconnect');
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://directconnect.us-west-2.amazonaws.com/
// Use the same region as specified above.
$success = $rest->Connect('directconnect.us-west-2.amazonaws.com',443,true,true);
if ($success != true) {
    print 'ConnectFailReason: ' . $rest->get_ConnectFailReason() . "\n";
    print $rest->lastErrorText() . "\n";
    exit;
}

// The following code creates the JSON request body.
// The JSON created by this code is shown below.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

$json = new CkJsonObject();
$json->UpdateString('newBGPPeer.addressFamily','string');
$json->UpdateString('newBGPPeer.amazonAddress','string');
$json->UpdateInt('newBGPPeer.asn',123);
$json->UpdateString('newBGPPeer.authKey','string');
$json->UpdateString('newBGPPeer.customerAddress','string');
$json->UpdateString('virtualInterfaceId','string');

// The JSON request body created by the above code:

// {
//   "newBGPPeer": {
//     "addressFamily": "string",
//     "amazonAddress": "string",
//     "asn": number,
//     "authKey": "string",
//     "customerAddress": "string"
//   },
//   "virtualInterfaceId": "string"
// }

$rest->AddHeader('Content-Type','application/x-amz-json-1.1');
$rest->AddHeader('X-Amz-Target','OvertureService.CreateBGPPeer');

$sbRequestBody = new CkStringBuilder();
$json->EmitSb($sbRequestBody);
$sbResponseBody = new CkStringBuilder();
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != true) {
    print $rest->lastErrorText() . "\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode != 200) {
    print 'Response Header:' . "\n";
    print $rest->responseHeader() . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

$jResp = new CkJsonObject();
$jResp->LoadSb($sbResponseBody);

// The following code parses the JSON response.
// A sample JSON response is shown below the sample code.

// Use this online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$AddressFamily = $jResp->stringOf('virtualInterface.addressFamily');
$AmazonAddress = $jResp->stringOf('virtualInterface.amazonAddress');
$AmazonSideAsn = $jResp->IntOf('virtualInterface.amazonSideAsn');
$v_Asn = $jResp->IntOf('virtualInterface.asn');
$AuthKey = $jResp->stringOf('virtualInterface.authKey');
$AwsDeviceV2 = $jResp->stringOf('virtualInterface.awsDeviceV2');
$AwsLogicalDeviceId = $jResp->stringOf('virtualInterface.awsLogicalDeviceId');
$ConnectionId = $jResp->stringOf('virtualInterface.connectionId');
$CustomerAddress = $jResp->stringOf('virtualInterface.customerAddress');
$CustomerRouterConfig = $jResp->stringOf('virtualInterface.customerRouterConfig');
$DirectConnectGatewayId = $jResp->stringOf('virtualInterface.directConnectGatewayId');
$JumboFrameCapable = $jResp->IntOf('virtualInterface.jumboFrameCapable');
$Location = $jResp->stringOf('virtualInterface.location');
$Mtu = $jResp->IntOf('virtualInterface.mtu');
$OwnerAccount = $jResp->stringOf('virtualInterface.ownerAccount');
$Region = $jResp->stringOf('virtualInterface.region');
$SiteLinkEnabled = $jResp->IntOf('virtualInterface.siteLinkEnabled');
$VirtualGatewayId = $jResp->stringOf('virtualInterface.virtualGatewayId');
$VirtualInterfaceId = $jResp->stringOf('virtualInterface.virtualInterfaceId');
$VirtualInterfaceName = $jResp->stringOf('virtualInterface.virtualInterfaceName');
$VirtualInterfaceState = $jResp->stringOf('virtualInterface.virtualInterfaceState');
$VirtualInterfaceType = $jResp->stringOf('virtualInterface.virtualInterfaceType');
$Vlan = $jResp->IntOf('virtualInterface.vlan');
$i = 0;
$count_i = $jResp->SizeOfArray('virtualInterface.bgpPeers');
while ($i < $count_i) {
    $jResp->put_I($i);
    $addressFamily = $jResp->stringOf('virtualInterface.bgpPeers[i].addressFamily');
    $amazonAddress = $jResp->stringOf('virtualInterface.bgpPeers[i].amazonAddress');
    $asn = $jResp->IntOf('virtualInterface.bgpPeers[i].asn');
    $authKey = $jResp->stringOf('virtualInterface.bgpPeers[i].authKey');
    $awsDeviceV2 = $jResp->stringOf('virtualInterface.bgpPeers[i].awsDeviceV2');
    $awsLogicalDeviceId = $jResp->stringOf('virtualInterface.bgpPeers[i].awsLogicalDeviceId');
    $bgpPeerId = $jResp->stringOf('virtualInterface.bgpPeers[i].bgpPeerId');
    $bgpPeerState = $jResp->stringOf('virtualInterface.bgpPeers[i].bgpPeerState');
    $bgpStatus = $jResp->stringOf('virtualInterface.bgpPeers[i].bgpStatus');
    $customerAddress = $jResp->stringOf('virtualInterface.bgpPeers[i].customerAddress');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('virtualInterface.routeFilterPrefixes');
while ($i < $count_i) {
    $jResp->put_I($i);
    $cidr = $jResp->stringOf('virtualInterface.routeFilterPrefixes[i].cidr');
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray('virtualInterface.tags');
while ($i < $count_i) {
    $jResp->put_I($i);
    $key = $jResp->stringOf('virtualInterface.tags[i].key');
    $value = $jResp->stringOf('virtualInterface.tags[i].value');
    $i = $i + 1;
}

// A sample JSON response body parsed by the above code:

// {
//   "virtualInterface": {
//     "addressFamily": "string",
//     "amazonAddress": "string",
//     "amazonSideAsn": number,
//     "asn": number,
//     "authKey": "string",
//     "awsDeviceV2": "string",
//     "awsLogicalDeviceId": "string",
//     "bgpPeers": [
//       {
//         "addressFamily": "string",
//         "amazonAddress": "string",
//         "asn": number,
//         "authKey": "string",
//         "awsDeviceV2": "string",
//         "awsLogicalDeviceId": "string",
//         "bgpPeerId": "string",
//         "bgpPeerState": "string",
//         "bgpStatus": "string",
//         "customerAddress": "string"
//       }
//     ],
//     "connectionId": "string",
//     "customerAddress": "string",
//     "customerRouterConfig": "string",
//     "directConnectGatewayId": "string",
//     "jumboFrameCapable": boolean,
//     "location": "string",
//     "mtu": number,
//     "ownerAccount": "string",
//     "region": "string",
//     "routeFilterPrefixes": [
//       {
//         "cidr": "string"
//       }
//     ],
//     "siteLinkEnabled": boolean,
//     "tags": [
//       {
//         "key": "string",
//         "value": "string"
//       }
//     ],
//     "virtualGatewayId": "string",
//     "virtualInterfaceId": "string",
//     "virtualInterfaceName": "string",
//     "virtualInterfaceState": "string",
//     "virtualInterfaceType": "string",
//     "vlan": number
//   }
// }

?>