Chilkat Online Tools

StartExperiment Perl Example

AWS Fault Injection Simulator

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("fis");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://fis.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("fis.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("clientToken","string");
$json->UpdateString("experimentTemplateId","string");
$json->UpdateString("tags.string","string");

# The JSON request body created by the above code:

# {
#   "clientToken": "string",
#   "experimentTemplateId": "string",
#   "tags": {
#     "string": "string"
#   }
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","StartExperiment");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/experiments",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$ActionId = $jResp->stringOf("experiment.actions.string.actionId");
$Description = $jResp->stringOf("experiment.actions.string.description");
$EndTime = $jResp->IntOf("experiment.actions.string.endTime");
$v_String = $jResp->stringOf("experiment.actions.string.parameters.string");
$StartTime = $jResp->IntOf("experiment.actions.string.startTime");
$Reason = $jResp->stringOf("experiment.actions.string.state.reason");
$Status = $jResp->stringOf("experiment.actions.string.state.status");
$TargetsString = $jResp->stringOf("experiment.actions.string.targets.string");
$CreationTime = $jResp->IntOf("experiment.creationTime");
$experimentEndTime = $jResp->IntOf("experiment.endTime");
$ExperimentTemplateId = $jResp->stringOf("experiment.experimentTemplateId");
$Id = $jResp->stringOf("experiment.id");
$LogGroupArn = $jResp->stringOf("experiment.logConfiguration.cloudWatchLogsConfiguration.logGroupArn");
$LogSchemaVersion = $jResp->IntOf("experiment.logConfiguration.logSchemaVersion");
$BucketName = $jResp->stringOf("experiment.logConfiguration.s3Configuration.bucketName");
$Prefix = $jResp->stringOf("experiment.logConfiguration.s3Configuration.prefix");
$RoleArn = $jResp->stringOf("experiment.roleArn");
$experimentStartTime = $jResp->IntOf("experiment.startTime");
$StateReason = $jResp->stringOf("experiment.state.reason");
$StateStatus = $jResp->stringOf("experiment.state.status");
$TagsString = $jResp->stringOf("experiment.tags.string");
$ParametersString = $jResp->stringOf("experiment.targets.string.parameters.string");
$ResourceTagsString = $jResp->stringOf("experiment.targets.string.resourceTags.string");
$ResourceType = $jResp->stringOf("experiment.targets.string.resourceType");
$SelectionMode = $jResp->stringOf("experiment.targets.string.selectionMode");
$i = 0;
$count_i = $jResp->SizeOfArray("experiment.actions.string.startAfter");
while ($i < $count_i) {
    $jResp->put_I($i);
    $strVal = $jResp->stringOf("experiment.actions.string.startAfter[i]");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("experiment.stopConditions");
while ($i < $count_i) {
    $jResp->put_I($i);
    $source = $jResp->stringOf("experiment.stopConditions[i].source");
    $value = $jResp->stringOf("experiment.stopConditions[i].value");
    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("experiment.targets.string.filters");
while ($i < $count_i) {
    $jResp->put_I($i);
    $path = $jResp->stringOf("experiment.targets.string.filters[i].path");
    $j = 0;
    $count_j = $jResp->SizeOfArray("experiment.targets.string.filters[i].values");
    while ($j < $count_j) {
        $jResp->put_J($j);
        $strVal = $jResp->stringOf("experiment.targets.string.filters[i].values[j]");
        $j = $j + 1;
    }

    $i = $i + 1;
}

$i = 0;
$count_i = $jResp->SizeOfArray("experiment.targets.string.resourceArns");
while ($i < $count_i) {
    $jResp->put_I($i);
    $strVal = $jResp->stringOf("experiment.targets.string.resourceArns[i]");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "experiment": {
#     "actions": {
#       "string": {
#         "actionId": "string",
#         "description": "string",
#         "endTime": number,
#         "parameters": {
#           "string": "string"
#         },
#         "startAfter": [
#           "string"
#         ],
#         "startTime": number,
#         "state": {
#           "reason": "string",
#           "status": "string"
#         },
#         "targets": {
#           "string": "string"
#         }
#       }
#     },
#     "creationTime": number,
#     "endTime": number,
#     "experimentTemplateId": "string",
#     "id": "string",
#     "logConfiguration": {
#       "cloudWatchLogsConfiguration": {
#         "logGroupArn": "string"
#       },
#       "logSchemaVersion": number,
#       "s3Configuration": {
#         "bucketName": "string",
#         "prefix": "string"
#       }
#     },
#     "roleArn": "string",
#     "startTime": number,
#     "state": {
#       "reason": "string",
#       "status": "string"
#     },
#     "stopConditions": [
#       {
#         "source": "string",
#         "value": "string"
#       }
#     ],
#     "tags": {
#       "string": "string"
#     },
#     "targets": {
#       "string": {
#         "filters": [
#           {
#             "path": "string",
#             "values": [
#               "string"
#             ]
#           }
#         ],
#         "parameters": {
#           "string": "string"
#         },
#         "resourceArns": [
#           "string"
#         ],
#         "resourceTags": {
#           "string": "string"
#         },
#         "resourceType": "string",
#         "selectionMode": "string"
#       }
#     }
#   }
# }