Chilkat Online Tools

GetMergeConflicts Perl Example

AWS CodeCommit

use chilkat();

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

$rest = chilkat::CkRest->new();

$authAws = chilkat::CkAuthAws->new();
$authAws->put_AccessKey("AWS_ACCESS_KEY");
$authAws->put_SecretKey("AWS_SECRET_KEY");

# Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->put_Region("us-west-2");
$authAws->put_ServiceName("codecommit");
# SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

# URL: https://codecommit.us-west-2.amazonaws.com/
# Use the same region as specified above.
$success = $rest->Connect("codecommit.us-west-2.amazonaws.com",443,1,1);
if ($success != 1) {
    print "ConnectFailReason: " . $rest->get_ConnectFailReason() . "\r\n";
    print $rest->lastErrorText() . "\r\n";
    exit;
}

# The following code creates the JSON request body.
# The JSON created by this code is shown below.

# Use this online tool to generate code from sample JSON:
# Generate Code to Create JSON

$json = chilkat::CkJsonObject->new();
$json->UpdateString("conflictDetailLevel","string");
$json->UpdateString("conflictResolutionStrategy","string");
$json->UpdateString("destinationCommitSpecifier","string");
$json->UpdateInt("maxConflictFiles",123);
$json->UpdateString("mergeOption","string");
$json->UpdateString("nextToken","string");
$json->UpdateString("repositoryName","string");
$json->UpdateString("sourceCommitSpecifier","string");

# The JSON request body created by the above code:

# {
#   "conflictDetailLevel": "string",
#   "conflictResolutionStrategy": "string",
#   "destinationCommitSpecifier": "string",
#   "maxConflictFiles": number,
#   "mergeOption": "string",
#   "nextToken": "string",
#   "repositoryName": "string",
#   "sourceCommitSpecifier": "string"
# }

$rest->AddHeader("Content-Type","application/x-amz-json-1.1");
$rest->AddHeader("X-Amz-Target","CodeCommit_20150413.GetMergeConflicts");

$sbRequestBody = chilkat::CkStringBuilder->new();
$json->EmitSb($sbRequestBody);
$sbResponseBody = chilkat::CkStringBuilder->new();
$success = $rest->FullRequestSb("POST","/",$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->lastErrorText() . "\r\n";
    exit;
}

$respStatusCode = $rest->get_ResponseStatusCode();
print "response status code = " . $respStatusCode . "\r\n";
if ($respStatusCode != 200) {
    print "Response Header:" . "\r\n";
    print $rest->responseHeader() . "\r\n";
    print "Response Body:" . "\r\n";
    print $sbResponseBody->getAsString() . "\r\n";
    exit;
}

$jResp = chilkat::CkJsonObject->new();
$jResp->LoadSb($sbResponseBody);

# The following code parses the JSON response.
# A sample JSON response is shown below the sample code.

# Use this online tool to generate parsing code from sample JSON:
# Generate Parsing Code from JSON

$baseCommitId = $jResp->stringOf("baseCommitId");
$destinationCommitId = $jResp->stringOf("destinationCommitId");
$mergeable = $jResp->IntOf("mergeable");
$nextToken = $jResp->stringOf("nextToken");
$sourceCommitId = $jResp->stringOf("sourceCommitId");
$i = 0;
$count_i = $jResp->SizeOfArray("conflictMetadataList");
while ($i < $count_i) {
    $jResp->put_I($i);
    $contentConflict = $jResp->IntOf("conflictMetadataList[i].contentConflict");
    $fileModeConflict = $jResp->IntOf("conflictMetadataList[i].fileModeConflict");
    $Base = $jResp->stringOf("conflictMetadataList[i].fileModes.base");
    $Destination = $jResp->stringOf("conflictMetadataList[i].fileModes.destination");
    $Source = $jResp->stringOf("conflictMetadataList[i].fileModes.source");
    $filePath = $jResp->stringOf("conflictMetadataList[i].filePath");
    $fileSizesBase = $jResp->IntOf("conflictMetadataList[i].fileSizes.base");
    $fileSizesDestination = $jResp->IntOf("conflictMetadataList[i].fileSizes.destination");
    $fileSizesSource = $jResp->IntOf("conflictMetadataList[i].fileSizes.source");
    $isBinaryFileBase = $jResp->IntOf("conflictMetadataList[i].isBinaryFile.base");
    $isBinaryFileDestination = $jResp->IntOf("conflictMetadataList[i].isBinaryFile.destination");
    $isBinaryFileSource = $jResp->IntOf("conflictMetadataList[i].isBinaryFile.source");
    $mergeOperationsDestination = $jResp->stringOf("conflictMetadataList[i].mergeOperations.destination");
    $mergeOperationsSource = $jResp->stringOf("conflictMetadataList[i].mergeOperations.source");
    $numberOfConflicts = $jResp->IntOf("conflictMetadataList[i].numberOfConflicts");
    $objectTypeConflict = $jResp->IntOf("conflictMetadataList[i].objectTypeConflict");
    $objectTypesBase = $jResp->stringOf("conflictMetadataList[i].objectTypes.base");
    $objectTypesDestination = $jResp->stringOf("conflictMetadataList[i].objectTypes.destination");
    $objectTypesSource = $jResp->stringOf("conflictMetadataList[i].objectTypes.source");
    $i = $i + 1;
}

# A sample JSON response body parsed by the above code:

# {
#   "baseCommitId": "string",
#   "conflictMetadataList": [
#     {
#       "contentConflict": boolean,
#       "fileModeConflict": boolean,
#       "fileModes": {
#         "base": "string",
#         "destination": "string",
#         "source": "string"
#       },
#       "filePath": "string",
#       "fileSizes": {
#         "base": number,
#         "destination": number,
#         "source": number
#       },
#       "isBinaryFile": {
#         "base": boolean,
#         "destination": boolean,
#         "source": boolean
#       },
#       "mergeOperations": {
#         "destination": "string",
#         "source": "string"
#       },
#       "numberOfConflicts": number,
#       "objectTypeConflict": boolean,
#       "objectTypes": {
#         "base": "string",
#         "destination": "string",
#         "source": "string"
#       }
#     }
#   ],
#   "destinationCommitId": "string",
#   "mergeable": boolean,
#   "nextToken": "string",
#   "sourceCommitId": "string"
# }