Chilkat Online Tools

DescribeGatewayInformation autoit Example

AWS Storage Gateway

; This example requires the Chilkat API to have been previously unlocked.
; See Global Unlock Sample for sample code.

$oRest = ObjCreate("Chilkat_9_5_0.Rest")
Local $bSuccess

$oAuthAws = ObjCreate("Chilkat_9_5_0.AuthAws")
$oAuthAws.AccessKey = "AWS_ACCESS_KEY"
$oAuthAws.SecretKey = "AWS_SECRET_KEY"

; Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$oAuthAws.Region = "us-west-2"
$oAuthAws.ServiceName = "storagegateway"
; SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$oRest.SetAuthAws($oAuthAws)

; URL: https://storagegateway.us-west-2.amazonaws.com/
; Use the same region as specified above.
$bSuccess = $oRest.Connect("storagegateway.us-west-2.amazonaws.com",443,True,True)
If ($bSuccess <> True) Then
    ConsoleWrite("ConnectFailReason: " & $oRest.ConnectFailReason & @CRLF)
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

; The following code creates the JSON request body.
; The JSON created by this code is shown below.

; Use this online tool to generate code from sample JSON:
; Generate Code to Create JSON

$oJson = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJson.UpdateString("GatewayARN","string")

; The JSON request body created by the above code:

; {
;   "GatewayARN": "string"
; }

$oRest.AddHeader("Content-Type","application/x-amz-json-1.1")
$oRest.AddHeader("X-Amz-Target","StorageGateway_20130630.DescribeGatewayInformation")

$oSbRequestBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$oJson.EmitSb($oSbRequestBody)
$oSbResponseBody = ObjCreate("Chilkat_9_5_0.StringBuilder")
$bSuccess = $oRest.FullRequestSb("POST","/",$oSbRequestBody,$oSbResponseBody)
If ($bSuccess <> True) Then
    ConsoleWrite($oRest.LastErrorText & @CRLF)
    Exit
EndIf

Local $iRespStatusCode = $oRest.ResponseStatusCode
ConsoleWrite("response status code = " & $iRespStatusCode & @CRLF)
If ($iRespStatusCode <> 200) Then
    ConsoleWrite("Response Header:" & @CRLF)
    ConsoleWrite($oRest.ResponseHeader & @CRLF)
    ConsoleWrite("Response Body:" & @CRLF)
    ConsoleWrite($oSbResponseBody.GetAsString() & @CRLF)
    Exit
EndIf

$oJResp = ObjCreate("Chilkat_9_5_0.JsonObject")
$oJResp.LoadSb($oSbResponseBody)

; The following code parses the JSON response.
; A sample JSON response is shown below the sample code.

; Use this online tool to generate parsing code from sample JSON:
; Generate Parsing Code from JSON

Local $sIpv4Address
Local $sIpv6Address
Local $sMacAddress
Local $strVal
Local $sKey
Local $sValue

Local $sCloudWatchLogGroupARN = $oJResp.StringOf("CloudWatchLogGroupARN")
Local $sDeprecationDate = $oJResp.StringOf("DeprecationDate")
Local $sEc2InstanceId = $oJResp.StringOf("Ec2InstanceId")
Local $sEc2InstanceRegion = $oJResp.StringOf("Ec2InstanceRegion")
Local $sEndpointType = $oJResp.StringOf("EndpointType")
Local $sGatewayARN = $oJResp.StringOf("GatewayARN")
Local $sGatewayCapacity = $oJResp.StringOf("GatewayCapacity")
Local $sGatewayId = $oJResp.StringOf("GatewayId")
Local $sGatewayName = $oJResp.StringOf("GatewayName")
Local $sGatewayState = $oJResp.StringOf("GatewayState")
Local $sGatewayTimezone = $oJResp.StringOf("GatewayTimezone")
Local $sGatewayType = $oJResp.StringOf("GatewayType")
Local $sHostEnvironment = $oJResp.StringOf("HostEnvironment")
Local $sHostEnvironmentId = $oJResp.StringOf("HostEnvironmentId")
Local $sLastSoftwareUpdate = $oJResp.StringOf("LastSoftwareUpdate")
Local $sNextUpdateAvailabilityDate = $oJResp.StringOf("NextUpdateAvailabilityDate")
Local $sSoftwareUpdatesEndDate = $oJResp.StringOf("SoftwareUpdatesEndDate")
Local $sVPCEndpoint = $oJResp.StringOf("VPCEndpoint")
Local $i = 0
Local $iCount_i = $oJResp.SizeOfArray("GatewayNetworkInterfaces")
While $i < $iCount_i
    $oJResp.I = $i
    $sIpv4Address = $oJResp.StringOf("GatewayNetworkInterfaces[i].Ipv4Address")
    $sIpv6Address = $oJResp.StringOf("GatewayNetworkInterfaces[i].Ipv6Address")
    $sMacAddress = $oJResp.StringOf("GatewayNetworkInterfaces[i].MacAddress")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("SupportedGatewayCapacities")
While $i < $iCount_i
    $oJResp.I = $i
    $strVal = $oJResp.StringOf("SupportedGatewayCapacities[i]")
    $i = $i + 1
Wend
$i = 0
$iCount_i = $oJResp.SizeOfArray("Tags")
While $i < $iCount_i
    $oJResp.I = $i
    $sKey = $oJResp.StringOf("Tags[i].Key")
    $sValue = $oJResp.StringOf("Tags[i].Value")
    $i = $i + 1
Wend

; A sample JSON response body parsed by the above code:

; {
;   "CloudWatchLogGroupARN": "string",
;   "DeprecationDate": "string",
;   "Ec2InstanceId": "string",
;   "Ec2InstanceRegion": "string",
;   "EndpointType": "string",
;   "GatewayARN": "string",
;   "GatewayCapacity": "string",
;   "GatewayId": "string",
;   "GatewayName": "string",
;   "GatewayNetworkInterfaces": [
;     {
;       "Ipv4Address": "string",
;       "Ipv6Address": "string",
;       "MacAddress": "string"
;     }
;   ],
;   "GatewayState": "string",
;   "GatewayTimezone": "string",
;   "GatewayType": "string",
;   "HostEnvironment": "string",
;   "HostEnvironmentId": "string",
;   "LastSoftwareUpdate": "string",
;   "NextUpdateAvailabilityDate": "string",
;   "SoftwareUpdatesEndDate": "string",
;   "SupportedGatewayCapacities": [
;     "string"
;   ],
;   "Tags": [
;     {
;       "Key": "string",
;       "Value": "string"
;     }
;   ],
;   "VPCEndpoint": "string"
; }